-
Event Viewer (Optional)
The Event Viewer allows for a visual display of the la st 4 Events that have occurred on the M60 Alarm Dialler.
Events are either a dial-out due to an active alarm, or a call-back to cancel the M60 from continuing to dial-out.
Each Event will use a single line on the display.
Dial-out Event
A Dial-out Event will occur whenever the M60 has completed the dialling of a telephone number.
The Dial-out Event will always show the time followed by the Date and Month and then the first two active alarms separated by a comma. The last character on the line informs the user if there were no other active alarms or there are more active alarms than displayed.
Call-back/Cancellation Event
A Call-back Event will occur whenever the M60 has been called back to cancel further calls being made.
The event viewer will always show the last 4 events in sequence, running from oldest to newest.
Upgrade options include holding a higher number of events and more detail.
The M60 Alarm Auto Dialer standard features include;
- 4, 8, 16, 32 & 56 individual alarm inputs / channels.
- Individual Speech Messages for each input.
- Individual SMS Messages for each input.
- PSTN & GSM Options.
- Internal Mains Failure Alarm Sensor.
- 24+ Hour Internal Battery Backup.
- Fully Menu and Keypad Driven.
- IP56 Industrial Rated Enclosure.
Because the M60 is built by us in the UK if there are any special features you require for your project we can normally create them for you.
The above is only a small subset of the available features on the M60 Alarm Auto Dialer; for a complete list visit the Standard Features and Optional Features pages or contact us for a quote.
Written by M60 GSM Alarm Dialer
-
 M30 Auto dialer Auto dialer With Text Message Facility
The M30 Auto dialer With Text Message Facility is an advanced purpose built unit designed for critical and harsh environments.
As an industrial Auto Dialer the M30 comes with all the types of feature you would expect, 4-56 individual inputs, PSTN, GSM, SMS, Pager communications, Fully LCD display & Keypad driven, hardened electronics and multiple backup systems.
Its backup systems include 24-48 hour battery backup, phone line monitoring, GSM phone line Backup, text messages and multiple dialout numbers.
Text Message Facility
The M30 allows you to have a fully customisable text message for each alarm input, meaning you won’t receive a cryptic “Channel 16 alarm condition” but a much more meaningful “High temperature in Lab 2” message.
Voice Options
As well as a Text Message facility the M30 also comes with a PSTN voice message system included as standard, this works in the same way as the text messages with each input having its own user recordable message. You can also send voice messages over the GSM network as well, either as a dedicated medium or as a backup if the connected land line fails.
Multiple Contacts
As standard when an alarm is detected, the M30 will communicate it to the universal contact list that the user had setup. You can also upgrade your unit to allow each of the inputs to have its own dedicated contact list e.g. input 1 can phone the fire brigade, input 2 can phone the on call engineer etc.
When setting up your contact lists you can specify the type of message each recipient gets (Text Message, Voice, Pager).
Standard Features;
Below is a small subset of the standard features on the M30, for a for more comprehensive list or information please contact us or visit the standard or optional features pages.
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
For more information of the Auto dialer With Text Message Facility visit the Text Message Feature page or the Text Message section on our Blog.
Written by M60 GSM Alarm Dialer
-
The M30 SMS Auto Dialer is an industrial unit, purposely designed for harsh commercial situations.
As a commercial piece of equipment it comes with all the features you would expect; 4 to 56 individual inputs, integrated battery backup, high spec components , inbuilt surge protection and is fully configurable via its inbuilt LCD and keypad system.
M30 Alarm Dialer The M30 is used around the world in a multitude of situations from Horticulture in Wales, Hotels & Hospitals in London, Power stations in Scotland, Building management systems in Qatar, desalination plants in Florida and railways in Hong Kong.
SMS Text message feature
Each input on the M30 has its own individual SMS text message on top of that each unit has a unique identifier so you can easily distinguish not only between the different inputs but also between multiple machines.
Each SMS message is fully customisable, meaning you are not stuck with a generic “channel 1 alarm condition” but with a much more useful “High temperature in building 23”.
It is very easy to setup, when you are entering your alarm contact numbers via the keypad and LCD display you simply select the type of message you would like the recipient to receive. E.g. SMS, Voice, Pager, Data etc
Voice Feature
The M30 also comes with the included free optional feature to send real user recordable speech messages over a PSTN land line connection or optionally over the GSM network. The GSM connection can also be used as a backup; The M30 will monitor the connected PSTN line and if it fails will switch automatically to the GSM phone network.
Each input/channel has its own speech message and there is also a unique identifier message the same as the SMS messages.
Designed and built in the UK
The M30 is designed and built by ourselves in the UK, because of this if you want to customise your machine or add a bespoke feature or function then that is not a problem.
M30 SMS Auto Dialer Features
Below is a small subset of the features that are available on the M30, for a full list please visit the Standard or Optional feature pages.
- 4,8,16 or 56 individual alarm inputs.
- Integrated 24 hour + Backup Battery.
- Individual SMS alarm text messages.
- Individual Real Speech Messages.
- PSTN Telephone Line failure sensing (optional).
- GSM Network dialing and backup (optional).
- Fully menu and keypad driven.
- 999 Approved.
If you would like any more information or pricing on the M30 then please phone us on 01344 874114 or send us an email.
Written by M60 GSM Alarm Dialer
-
SMS Alarm Dialer
The M30 SMS Alarm Dialer is an rugged machine specifically designed for commercial and industrial conditions. It has over 60 years of alarm dialer design experience behind it and was designed with input from our customers to make sure it had all the features and functions they required.
 SMS Alarm Dialer The M30 SMS features include 4,8,16 or 56 individual inputs each with their own SMS or voice message, IP56 enclosure, integrated mains failure and 24+hrs battery backup to name a few (check out a more in-depth list below).
SMS features;
The SMS feature is very easy to setup, when you are setting up the outgoing alarm contact numbers you just select whether you would like the recipient to get an SMS or a voice message, the rest is done automatically for you.
Each individual input on the M30 has its own individual SMS message, plus there is a universal machine identification, so you can easily tell where it has come from.
So for example instead of getting a generic “Channel 32 Alarm Condition” SMS message you get a much more useful “London Desalination Plant – Low Water in tank 22” message.
To make things easier for you we set up all the messages so you do not end up sitting there for hours typing in each message
Speech Messages;
If required you can also send voice messages to your alarm recipients, this can be over a standard PSTN lane line telephone or via the mobile GSM networks.
If you use the PSTN network you can setup the M30 to monitor the line and if it fails, to automatically switch to the GSM network to ensure you always get your alarms out.
As per the SMS messages each input can have its own individual speech message.
Software Features;
The M30 is designed and built by us in the UK and is fully customisable, so if you would like the M30 to work in a certain way or to have a unique function for your application then we will be happy to create it for you.
We also have lots of “off the shelf” upgrades available for example;
- More alarm numbers – As standard the M30 allows you to have up to 5 numbers in each roster (alarm contact list) but this can be extended to 10 or more.
- Auto Isolate – M30 automatically turns itself on and off at predefined times and days.
- Channel to Roster – Each input can dial a totally separate list of alarm contacts.
- Auto Test – The M30 will automatically make a test call on a predefined time and day.
Standard Features;
Below is a small subset of the standard features on the M30, for a more comprehensive list or information please contact us or visit the standard or optional features pages.
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
For more information of the SMS Alarm Dialer visit the SMS Feature page or the SMS section on our Blog.
Written by M60 GSM Alarm Dialer
-
CTR Channel to Roster Software Upgrade
On a Standard M30 on when dialing it will select the Duty Roster set by the User (1,2 or 3). The current Duty Roster selected is shown on the top right of the LCD display (e.g. R1, R2, R3).
 CTR Channel to Roster Software Upgrade
The Channel to Roster software works differently. When an alarm becomes active, instead of the M30 dialling out on one of the Duty Rosters, the M30 will automatically select a Roster linked to that alarm channel.
So for Example;
If Channel 1 is activated it will dial Roster 1.
If Channel 5 is activated it will dial Roster 5.
If Channel 10 is activated it will dial Roster 10 etc.
This software upgrade is great for when you need to communicate different alarms to different people for example the fire brigade for the fire alarm and the maintenance department for the Air Conditioning in the server room.
This new feature is available either as an option on a new M30 or as a simple software upgrade on a current machine.
For more information and pricing on the C2R Software Upgrade please contact us
Written by M60 GSM Alarm Dialer
- c
- Compose new post
- j
- Next post/Next comment
- k
- Previous post/Previous comment
- r
- Reply
- e
- Edit
- o
- Show/Hide comments
- t
- Go to top
- l
- Go to login
- h
- Show/Hide help
- shift + esc
- Cancel
|
