Our M60 Alarm Dialler system is designed for use in industrial and laboratorial environments, and for the protection, monitoring and reporting of systems such as Cryogenic Storage Dewars.
The Dewar storage system is a unique type of vacuum flask that is used for holding/storing cryogens such as liquid helium and nitrogrem where their boiling points are lower than room temperature; Dewars are named after their designer James Dewar.
Cryogenic Storage Dewars have various alarms that can be easily connected to our M60 for monitoring and alarm communication in the event of a problem. Some of the items that are rutinly monitored are listed below.
High Pressure Alarm.
Safety Valves Alarm.
Excessive Vapour Pressure.
Gas Alarm.
Room Oxygen Levels.
Mains failure.
We have been designing and manufacturing Alarm Dialler systems since 1956 and the M60 is our latest version. It is easy to use with an LCD display and keypad; it comes with features such as an integrated battery backup, remote integration and an event viewer.
Voice Alarm Messages
As standard each input on the M60 has its own voice message that can be simply recorded by the user , so you can replace a “channel 12” alarm message with a more usefull “High Pressure Alarm in room 2” message.
We also provide a custom voice message recording service.
SMS Messages
Every input on the M60 can have its own unique user configurable SMS message to allow the recipient to easily identify what the alarm is.
Alarm Inputs
The M60 comes in 4,8,16 and 56 input versions. Each input can be individually configured to be either Normally Open or Normally Closed alarm circuits.
The M60 also offers 4 analogue inputs; these inputs can be configured as 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage, Potentiometric transducer and fully floating.
PSTN / Mobile / Cell Phone connection
The M60 can connect to multiple communication mediums including a standard PSTN land line and the Mobile/Cell Phone networks.
The M60 can send Voice messages over the PSTN network and voice and SMS messages over the Mobile/SMS network.
The Mobile/Cell Phone connection can also be used as a backup option, the M60 will monitor the connected PSTN landline and if the connected landline fails it will automatically switch over.
The M60 Cryogenic Storage Dewar Alarm System standard features include;
Our M60 is a Multi Input Alarm Dialer, designed for use in commercial and Industrial environments.
As a Professional Multi Input Alarm Dialer, it comes with all the features you would expect such as voice and SMS messaging, ability to setup multiple dial out groups, integrated battery backup, easy to use LCD interface, and is fully serviceable/repairable.
The M60 is used around the world to Monitor and Protect industries such as Livestock Protection, Horticulture Protection, Power Generation, Building Management, Pharmaceutical, Cold Storage and Fire Alarms.
Multi Input
The M60 provides up to 56 separate inputs, with the M60 coming in 4, 8, 16, 32 or 56 input versions every input can be individually enabled/disabled and setup as either Normally Open or Normally Closed alarm circuits.
Every input has its own user recordable voice message and or SMS text message, as they are user configurable you are not stuck with a “channel 24 alarm” you can set up a useful alarm message for example “Power failure in building 4”.
The M60 also offers 4 analogue inputs; these inputs can be configured as 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage, Potentiometric transducer and fully floating.
PSTN / Mobile / Cell Phone connection
The M60 can connect to multiple communication mediums including a standard PSTN land line and the Mobile/Cell Phone networks.
The M60 will send Voice messages over the PSTN network and voice and SMS messages over the Mobile/SMS network.
The Mobile/Cell Phone connection can also be used as a backup option, the M60 will monitor the connected PSTN landline and if the connected landline fails it will automatically switch over.
The M60 Multi Input Alarm Dialer standard features include;
The M60 GSM Auto Dialer is purposely designed to simply connect to your existing alarm system/control system/management system or computer by providing easy cable access, large screw down terminals, separate terminals for each input and the facility for separate or linked commons.
The M60 is fully customisable to your exact needs if a feature or function does not exist our technical team will be happy to create it for you.
Multiple Alarm Connections
The M60 allows to connect 4,8,16,32 or 56 separate alarm inputs, each input can be selected as a NO or NC contact. Every input can have its own user recordable Speech and or SMS alarm message, so you are not stuck with a generic “Channel 12 alarm condition” message but can setup a much more useful “Mains Failure in Building 4” Message.
Voice and SMS communication
The M60 can send both voice and SMS messages over the GSM mobile/cell phone networks. The M60 gives the facility for each to work with separate SIM cards/networks; this provides redundancy in case one phone network fails.
All the voice and SMS messages are user customisable.
Battery backup
The M60 has an integrated backup battery system that will provide 24 to 48 hours of protection depending on conditions. The M60 also has an integrated mains failure alarm and low battery alarm, allowing you to monitor the connected mains supply battery condition.
The M60 GSM Auto Dialer For Existing Alarm Systems standard features include;
The M60 Professional Alarm Dialer is designed and built in the UK and is our latest alarm dialer since building the world’s first in 1956.
The M60 is used around the work in a varied selection of industrial and professional environments such as Power Generation, Livestock Protection, Horticulture Production, Industrial Manufacturing, Pharmaceutical, Building Management and Hospitals.
As a professional Alarm dialer with over 65 years of design experience behind it, the M60 is fully customisable to meet your needs with many features available as standard.
Phone Line Monitoring and Backup Options
The M60 Professional Alarm Dialer can provide an alarm signal if the phone line is cut or fails, this could be used to trigger an onsite siren or even trigger the M60 Professional Alarm Dialer to switch to the Mobile/Cell phone network.
Voice and SMS Communications
The M60 Professional Alarm Dialer can send alarm messages by both voice and or SMS, all alarm messages are customisable to allow easy identification of any alarms.
Integrated Battery Backup
The M60 Professional Alarm Dialer comes with a dedicated battery backup and mains failure alarm. The standard battery offers a 24 to 48 hour backup facility; this can be upgraded to longer standby times.
Multiple Inputs
The M60 Professional Alarm Dialer comes with 4,8,16,32 or 56 individual alarm inputs. Each input can be selected as either Normally Open or Normally Closed. Each input has its user recordable voice message or SMS message allowing you to easily identify where the alarm originated.
The M60 can normally be upgraded with more inputs once purchased if more inputs are needed or the site is expanded.
The M60 Professional Alarm Dialer standard features include;
The M60 is an industrial alarm dialler system purposely designed for use in the harsh environments often found in remote and unmanned sites.
We have been designing and manufacturing Industrial alarm diallers for unmanned sites since 1956 and have brought all of our experience into our latest version the M60.
Below are just some of the features that the M60 has;
4 to 56 Individual Alarm Inputs
The M60 Alarm Dialler comes in multiple versions providing 4, 8, 16, 32 or 56 individual alarm inputs. Each input can be set as either Normally Closed or Normally Open, depending on your needs.
Integrated Battery Backup
The M60 comes with an integrated Battery backup providing up to 48 hours of coverage in a prolonged power cut, this can be increased with optional higher capacity battery packs.
Voice Alarm Messages over the GSM Mobile/Cell Phone networks
The M60 can use the 4G/3G mobile/cell phone networks to send voice alarm messages to your pre setup alarm contact list. Each input has its own dedicated voice message which can be customised by the end user; this allows you to easily identify which alarm has triggered the alarm rather than getting a standard “input 12 alarm” message
SMS Alarm Messages over the 4G & 3G Mobile/Cell Phone networks
The M60 can send customised SMS alarm messages to your alarm contacts. Each input has its own user definable message.
Phone Line Backup Facility
The M60 allows you to connect a standard landline as a primary phone connection; if this fails the M60 will automatically switch to the Mobile/Cell phone network.
Remote Integration
The M60 allows you to phone in at any time using the mobile/cell phone network to check its current status. During the Remote Integration the M60 will report any active alarms and let you know if any previously active alarms have now cleared.
The M60 Alarm System for Monitoring Unmanned Sites standard features include;
The M60 3G GSM Auto Dialler is an advanced alarm dialler specifically desined for use in Commerical and Industrial enviroments such as Power Generation, Gas / Oil Stations, Building Management, Livestock Protection, Horticulture, Landfills, Water & Waste Control.
3G GSM Auto Dialler
Multiple Inputs
Our M60 comes with up to 56 individual digital Normally Open or Normally Closed inputs and upto 4 Analogue inputs. Each input has its own user recordable voice message and SMS message allowing you to be able to quickly identify the cause of the alarm.
3G GSM Voice Communication
The M60 Auto Dialler provides the ability to connect directly to the 3G mobile/cell phone network to send voice alarm messages. The 3G connection can be used either as a dedicated link or as a backup facility. If it is used as a backup the M60 will monitor the connected PSTN land line phone line, and if it fails it will automatically switch to the 3G GSM network.
3G GSM SMS Communication
A recent addition to the M60 features is the ability to send SMS messages as well as voice messages. Each input on the M60 has its own user configurable message. The M60 can be setup to just send SMS messages, or a combination or SMS and voice messages.
Fully Customisable
The M60 is designed to be fully customisible, every part of the M60 can be altered to work with your systems and procedures. We can even create special software and make hardware modifications to give you the features you require.
The M60 3G GSM Auto Dialler standard features include;
We have just upgraded our M60 alarm dialler GSM module to allow connection to the new 5G network.
The New 5G version gives all the same features as the our 4G, 3G and 2G versions.
Inputs
The 5G GSM M60 Alarm Dialler comes in 4 diffrent versions either 4, 8, 16 or 56 inputs, each individual input has its own linked voice or SMS alarm message.
Speech, SMS and Data Calls.
The 5G GSM M60 Alarm Dialler offers a variety of message options, including real speech messages, SMS/text messages, Data and Pager messages.
Land Phone Line Backup Facility
The mobile/cellphone network can be setup as a secondary backup option. If you have a landline line the M60 will use and monitor that line, if the land line fails it will automatically switch to the mobile/cellphone network.
Email Facility Coming Soon
The M60 will soon offer Email options, contact us for more information.
The M60 Auto Telephone Dialer standard features include;
The M60 is an Alarm System That Calls Your Phone informing you of a problem with your equipment, personal or site.
The M60 is purposely designed for use in commercial, industrial and harsh environments. It works by monitoring the connected alarm signals, if they break or become active the M60 starts an automated dialout sequence to your pre-set up alarm contact list. It will then phone each person in turn informing them of the problem.
The messages given to the recipient are fully customisable real speech messages – that you can record yourself, SMS messages or Emails.
You can have extra features such as Autoroster or Event viewing; The Autoroster upgrade allows you to setup different contact lists depending on who is on duty, and the M60 will automatically switch to the correct list depending on the time and day.
The Event Viewer upgrade stores the last 5 events on the M60 allowing you to check what alarm happened when and who was called.
Communication options are via a connected PSTN land line or the Mobile/Cell phone network. If you use the GSM Mobile/Cell phone network, this can be either a dedicated link if you don’t have access to a land line or it can be used as a backup. If used as a backup the M60 monitors the connected landline, if it fails it will automatically switch across to the Mobile/Cell phone network.
SMS & Email.
The M60 can also optionally send SMS messages and Emails as well as real speech messages. The SMS & Email messages are also fully customisable, so you can easily and quickly identifiy the alarm.
The M60 Auto Telephone Dialer standard features include;
The M60 Telephone Auto Dialer Alarm System is an advanced Alarm Dialer, purposely designed for use in industrial/commercial situations. The M60 is used around the world in various industrials including; Manufacturing, Energy Production, Commerce, Horticulture, Livestock Protection, Lone Worker Protection and Pharmaceutical.
The M60 was designed with over 60 years of Alarm Dialer experience and the input of our customers, so it comes with a host of features including; Intergrated Battery Backup, Fully Menu Driven Setup System with LCD, Protected Inputs, Phone Line Backup System and an IP65 Enclosure. Visit our features page for more information.
Multiple inputs
The M60 comes in 4, 8, 16, 32 and 56 input versions. Each input has its own dedicated wiring terminals, visual indicator and alarm message.
Voice and SMS Alarm Messages.
The M60 can now send both Voice and SMS messages over the Mobile/Cell phone networks. Each channel/input has its own dedicated user configerable message, allowing easy and fast identification of alarms.
Email (coming soon)
Email and online monitoring of your M60’s is coming in 2019.
The M60 Auto Telephone Dialer standard features include;
4, 8, 16 & 56 individual alarm inputs / channels.
Individual Speech Messages for each input.
Individual SMS Messages for each input.
PSTN & GSM Options.
SMS Text messages.
Event and Alarm Logging (optional).
Internal Mains Failure Alarm Sensor.
24+ Hour Internal Battery Backup.
Fully Menu and Keypad Driven.
IP65 Industrial Rated Enclosure.
Because the M60 is built by us in the UK if there are any special features you require for your project we can normally create them for you.
The Event Viewer allows for a visual display of the last 4 Events that have occurred on the M60 Alarm Dialler.
Events are either a dial-out due to an active alarm, or a call-back to cancel the M60 from continuing to dial-out.
Each Event will use a single line on the display.
Dial-out Event
A Dial-out Event will occur whenever the M60 has completed the dialling of a telephone number.
The Dial-out Event will always show the time followed by the Date and Month and then the first two active alarms separated by a comma. The last character on the line informs the user if there were no other active alarms or there are more active alarms than displayed.
Call-back/Cancellation Event
A Call-back Event will occur whenever the M60 has been called back to cancel further calls being made.
The event viewer will always show the last 4 events in sequence, running from oldest to newest.
Upgrade options include holding a higher number of events and more detail.
The M60 Alarm Auto Dialer standard features include;
st 4 Events that have occurred on the M60 Alarm Dialler.
Reply
You must be logged in to post a comment.