SIM Alarm Dialer 

SIM Alarm Dialer

The M60 Sim Alarm Dialer is a purpose built automatic Alarm Dialer for use in industrial/commercial settings where there is a need to monitor critical processes / systems / buildings / livestock / people etc. The M60 can send SMS and or Voice Messages over the 2G, 3G and 4G mobile/cell phone networks inorder to send the notification of alarms to the required recipients.

Alarm Inputs

The M60 Sim Alarm Dialer comes in 4, 8, 16, 32 and 56 input versions. Every Alarm Input on the M60 comes with its own individual User Recordable/definable voice alarm message and also SMS alarm message (if applicable).

This allows you define messages to enable to easily identify what alarm has been triggered. E.g. Instead of “Alarm 1” you could get “High Temp In Building Beta” SIM Alarm Dialer

Alarm inputs can be NO/NC (Normally Open/Normally Closed) volt free contacts or with the analogue upgrade you can set up triggers on 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage and Potentiometric transducers.

SIM Card

The M60 can accept any standard full sized mobile/cell phone SIM card, the main exception are the “special” SIM Cards that automatically swap to the strongest networks. Unless you are have the Email upgrade you don’t need any data allowance on your phone contract, just voice and SMS.

Before use we recommend that the voicemail and PIN numbers are removed before use and some networks may need to you provide the IMEI number in order to connect to their network (this is mainly in the USA).

We would recommend you get the SIM card for whichever network has the strongest signal in the installation location and also to get it on contract if possible so you don’t have to worry about running out of credit

 

Features

The M60 comes with many features as standard including; An integrated battery backup, integrated mains failure detection, protected inputs, alarm outputs that can be used to trigger external devices such as sirens or strobes and also a large user friendly keypad and backlit LCD display.

Below are a small number of the features that come either as standard or as options.

 

The M60 SIM Alarm Dialer standard features include;

  • 4, 8, 16, 32 & 56 individual alarm inputs / channels.
  • Individual Speech Messages for each input.
  • Individual SMS Messages for each input.
  • PSTN & Mobile/Cell Options.
  • Internal Mains Failure Alarm Sensor.
  • 48 Hour Internal Battery Backup.
  • Fully Menu and Keypad Driven.
  • IP56 Industrial Rated Enclosure.

Because the M60 is built by us in the UK if there are any special features you require for your project we can normally create them for you.

The above is only a small subset of the available features on the M60 SIM Alarm Dialer; for a complete list visit the Standard Features and Optional Features pages or contact us for a quote.

Related Articles:

Written by