The M60 Sim Alarm Dialer is a purpose built automatic Alarm Dialer for use in industrial/commercial settings where there is a need to monitor critical processes / systems / buildings / livestock / people etc. The M60 can send SMS and or Voice Messages over the 2G, 3G and 4G mobile/cell phone networks inorder to send the notification of alarms to the required recipients.
Alarm Inputs
The M60 Sim Alarm Dialer comes in 4, 8, 16, 32 and 56 input versions. Every Alarm Input on the M60 comes with its own individual User Recordable/definable voice alarm message and also SMS alarm message (if applicable).
This allows you define messages to enable to easily identify what alarm has been triggered. E.g. Instead of “Alarm 1” you could get “High Temp In Building Beta”
Alarm inputs can be NO/NC (Normally Open/Normally Closed) volt free contacts or with the analogue upgrade you can set up triggers on 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage and Potentiometric transducers.
SIM Card
The M60 can accept any standard full sized mobile/cell phone SIM card, the main exception are the “special” SIM Cards that automatically swap to the strongest networks. Unless you are have the Email upgrade you don’t need any data allowance on your phone contract, just voice and SMS.
Before use we recommend that the voicemail and PIN numbers are removed before use and some networks may need to you provide the IMEI number in order to connect to their network (this is mainly in the USA).
We would recommend you get the SIM card for whichever network has the strongest signal in the installation location and also to get it on contract if possible so you don’t have to worry about running out of credit
Features
The M60 comes with many features as standard including; An integrated battery backup, integrated mains failure detection, protected inputs, alarm outputs that can be used to trigger external devices such as sirens or strobes and also a large user friendly keypad and backlit LCD display.
Below are a small number of the features that come either as standard or as options.
The M60 SIM Alarm Dialer standard features include;
Our M60 Alarm Dialler system is designed for use in industrial and laboratorial environments, and for the protection, monitoring and reporting of systems such as Cryogenic Storage Dewars.
The Dewar storage system is a unique type of vacuum flask that is used for holding/storing cryogens such as liquid helium and nitrogrem where their boiling points are lower than room temperature; Dewars are named after their designer James Dewar.
Cryogenic Storage Dewars have various alarms that can be easily connected to our M60 for monitoring and alarm communication in the event of a problem. Some of the items that are rutinly monitored are listed below.
High Pressure Alarm.
Safety Valves Alarm.
Excessive Vapour Pressure.
Gas Alarm.
Room Oxygen Levels.
Mains failure.
We have been designing and manufacturing Alarm Dialler systems since 1956 and the M60 is our latest version. It is easy to use with an LCD display and keypad; it comes with features such as an integrated battery backup, remote integration and an event viewer.
Voice Alarm Messages
As standard each input on the M60 has its own voice message that can be simply recorded by the user , so you can replace a “channel 12” alarm message with a more usefull “High Pressure Alarm in room 2” message.
We also provide a custom voice message recording service.
SMS Messages
Every input on the M60 can have its own unique user configurable SMS message to allow the recipient to easily identify what the alarm is.
Alarm Inputs
The M60 comes in 4,8,16 and 56 input versions. Each input can be individually configured to be either Normally Open or Normally Closed alarm circuits.
The M60 also offers 4 analogue inputs; these inputs can be configured as 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage, Potentiometric transducer and fully floating.
PSTN / Mobile / Cell Phone connection
The M60 can connect to multiple communication mediums including a standard PSTN land line and the Mobile/Cell Phone networks.
The M60 can send Voice messages over the PSTN network and voice and SMS messages over the Mobile/SMS network.
The Mobile/Cell Phone connection can also be used as a backup option, the M60 will monitor the connected PSTN landline and if the connected landline fails it will automatically switch over.
The M60 Cryogenic Storage Dewar Alarm System standard features include;
Our M60 is a Multi Input Alarm Dialer, designed for use in commercial and Industrial environments.
As a Professional Multi Input Alarm Dialer, it comes with all the features you would expect such as voice and SMS messaging, ability to setup multiple dial out groups, integrated battery backup, easy to use LCD interface, and is fully serviceable/repairable.
The M60 is used around the world to Monitor and Protect industries such as Livestock Protection, Horticulture Protection, Power Generation, Building Management, Pharmaceutical, Cold Storage and Fire Alarms.
Multi Input
The M60 provides up to 56 separate inputs, with the M60 coming in 4, 8, 16, 32 or 56 input versions every input can be individually enabled/disabled and setup as either Normally Open or Normally Closed alarm circuits.
Every input has its own user recordable voice message and or SMS text message, as they are user configurable you are not stuck with a “channel 24 alarm” you can set up a useful alarm message for example “Power failure in building 4”.
The M60 also offers 4 analogue inputs; these inputs can be configured as 4 to 20 ma, 0 to 10 ma, 0 to 20 ma, DC Voltage, Potentiometric transducer and fully floating.
PSTN / Mobile / Cell Phone connection
The M60 can connect to multiple communication mediums including a standard PSTN land line and the Mobile/Cell Phone networks.
The M60 will send Voice messages over the PSTN network and voice and SMS messages over the Mobile/SMS network.
The Mobile/Cell Phone connection can also be used as a backup option, the M60 will monitor the connected PSTN landline and if the connected landline fails it will automatically switch over.
The M60 Multi Input Alarm Dialer standard features include;
The M60 GSM Auto Dialer is purposely designed to simply connect to your existing alarm system/control system/management system or computer by providing easy cable access, large screw down terminals, separate terminals for each input and the facility for separate or linked commons.
The M60 is fully customisable to your exact needs if a feature or function does not exist our technical team will be happy to create it for you.
Multiple Alarm Connections
The M60 allows to connect 4,8,16,32 or 56 separate alarm inputs, each input can be selected as a NO or NC contact. Every input can have its own user recordable Speech and or SMS alarm message, so you are not stuck with a generic “Channel 12 alarm condition” message but can setup a much more useful “Mains Failure in Building 4” Message.
Voice and SMS communication
The M60 can send both voice and SMS messages over the GSM mobile/cell phone networks. The M60 gives the facility for each to work with separate SIM cards/networks; this provides redundancy in case one phone network fails.
All the voice and SMS messages are user customisable.
Battery backup
The M60 has an integrated backup battery system that will provide 24 to 48 hours of protection depending on conditions. The M60 also has an integrated mains failure alarm and low battery alarm, allowing you to monitor the connected mains supply battery condition.
The M60 GSM Auto Dialer For Existing Alarm Systems standard features include;
The M60 Professional Alarm Dialer is designed and built in the UK and is our latest alarm dialer since building the world’s first in 1956.
The M60 is used around the work in a varied selection of industrial and professional environments such as Power Generation, Livestock Protection, Horticulture Production, Industrial Manufacturing, Pharmaceutical, Building Management and Hospitals.
As a professional Alarm dialer with over 65 years of design experience behind it, the M60 is fully customisable to meet your needs with many features available as standard.
Phone Line Monitoring and Backup Options
The M60 Professional Alarm Dialer can provide an alarm signal if the phone line is cut or fails, this could be used to trigger an onsite siren or even trigger the M60 Professional Alarm Dialer to switch to the Mobile/Cell phone network.
Voice and SMS Communications
The M60 Professional Alarm Dialer can send alarm messages by both voice and or SMS, all alarm messages are customisable to allow easy identification of any alarms.
Integrated Battery Backup
The M60 Professional Alarm Dialer comes with a dedicated battery backup and mains failure alarm. The standard battery offers a 24 to 48 hour backup facility; this can be upgraded to longer standby times.
Multiple Inputs
The M60 Professional Alarm Dialer comes with 4,8,16,32 or 56 individual alarm inputs. Each input can be selected as either Normally Open or Normally Closed. Each input has its user recordable voice message or SMS message allowing you to easily identify where the alarm originated.
The M60 can normally be upgraded with more inputs once purchased if more inputs are needed or the site is expanded.
The M60 Professional Alarm Dialer standard features include;
The M60 is an industrial alarm dialler system purposely designed for use in the harsh environments often found in remote and unmanned sites.
We have been designing and manufacturing Industrial alarm diallers for unmanned sites since 1956 and have brought all of our experience into our latest version the M60.
Below are just some of the features that the M60 has;
4 to 56 Individual Alarm Inputs
The M60 Alarm Dialler comes in multiple versions providing 4, 8, 16, 32 or 56 individual alarm inputs. Each input can be set as either Normally Closed or Normally Open, depending on your needs.
Integrated Battery Backup
The M60 comes with an integrated Battery backup providing up to 48 hours of coverage in a prolonged power cut, this can be increased with optional higher capacity battery packs.
Voice Alarm Messages over the GSM Mobile/Cell Phone networks
The M60 can use the 4G/3G mobile/cell phone networks to send voice alarm messages to your pre setup alarm contact list. Each input has its own dedicated voice message which can be customised by the end user; this allows you to easily identify which alarm has triggered the alarm rather than getting a standard “input 12 alarm” message
SMS Alarm Messages over the 4G & 3G Mobile/Cell Phone networks
The M60 can send customised SMS alarm messages to your alarm contacts. Each input has its own user definable message.
Phone Line Backup Facility
The M60 allows you to connect a standard landline as a primary phone connection; if this fails the M60 will automatically switch to the Mobile/Cell phone network.
Remote Integration
The M60 allows you to phone in at any time using the mobile/cell phone network to check its current status. During the Remote Integration the M60 will report any active alarms and let you know if any previously active alarms have now cleared.
The M60 Alarm System for Monitoring Unmanned Sites standard features include;
The M60 4G Alarm dialler is a purpose built commercial/industrial 4G Alarm Dialler designed for use in remote and harsh environments.
It comes with 4,8,16,32 or 56 individual inputs, remote integration, alarm outputs, multiple alarm lists, and integrated battery backup.
Each input has it own dedicated Speech and or SMS message so you can easily identify the alarm.
The M60 is user friendly and easy to use with a straight forward menu system and LCD display.
It can easily connect to the 2G/3G/4G networks to send real speech voice, SMS and Email alarm messages and accepts standard sim cards from all the major networks.
The M60 allows the use of extension cables and external antennas so you can fit the M60 in metal clad buildings or areas with poor reception.
4,8,16,56 separate alarm inputs, each with their own dedicated speech message
4G Phone line Connection either dedicated line or as a backup option.
SMS Text Messages
PSTN Phone line Connection
Integrated 24hr plus battery backup.
Remote Integration – you can phone the unit at any time to check its status.
Fully Menu and keypad driven.
Designed and built for industrial and commercial environments.
Because the M60 is designed and built by us in the UK, we can customise the unit for your exact needs and situation including creating bespoke features and functions.
The M60 3G Alarm Dialler is an advanced Alarm Dialler designed primarily for use in critical commercial situations such as Livestock Protection, Power Failures, Environmental Protection, Freezer Temperature Monitoring, Server Rooms and Lone Worker Protection.
Our 3G Alarm Dialler has the facility to send both SMS and or Voice alarm messages to your preprogramed alarm contacts.
Each input has its own dedicated SMS and Voice message that is user customisable, this makes alarm identification easy so instead of getting a generic “Channel 1 alarm” you would get “High temperature in server room H”.
You can fit both contract and pay as you go full size 3G sim cards.
4,8,16,56 separate alarm inputs, each with their own dedicated speech message
3G Phone line Connection either dedicated line or as a backup option.
SMS Text Messages
PSTN Phone line Connection
Integrated 24hr plus battery backup.
Remote Integration – you can phone the unit at any time to check its status.
Fully Menu and keypad driven.
Designed and built for industrial and commercial environments.
Because the M60 is designed and built by us in the UK, we can customise the unit for your exact needs and situation including creating bespoke features and functions.
