-
Remote Site Alarm System
Our UK built and designed M30 Alarm System was created specifically to protect remote and unmanned sites and equipment.As the M30 is purpose built for remote and harsh environments it comes with all the types of features you might expect including; 4,8,16 or 56 dedicated alarm inputs, voice and SMS alarm messages, integrated 24/48 hour battery backup, low battery alarm, basic surge protection, an IP56 Enclosure rating and a user friendly LCD and keypad.
Even if your remote site does not have any electricity or phone lines or if they are intermittent you can still use the M30 as it can be run off a 12vdc supply and you can use the GSM mobile/phone lines to make and receive alarm messages.
.......
-
Alarm System for Manufacturing Plant
We have been producing Alarm and Remote Monitoring systems for Manufacturing Plants and large industrial sites since 1958.
Our Latest Alarm system is our M30, it is a purpose designed unit that comes with 4,8,16 & 56 individual inputs. When the M30 detects an alarm signal it will automatically communicate the problem to the correct on call personal via Voice Message, Text Message, Pager or Data. It can also trigger a local sounder or strobe, the M30 can also be used to remotely switch devices on or off. PSTN, GSM and SMS Communication.
The M30 can connect to and send messages over both the standard PSTN phone network and also the Mobile/Cell phone networks as .......
-
PSTN Auto-Dialer
The M30 PSTN Auto-Dialer is a purpose built industrial unit, designed to connect to any device that provides a NO/NC (Normally Open/Normally Closed) alarm contact E.g. Thermostats, Mains failure detectors, Building Management systems, Fan panels or High/Low water detectors etc. You can also use analogue inputs via the optional interface.
The M30 primarily uses the PSTN network to communicate user recordable voice messages direct to the correct on call personal, because it uses the PSTN network you don't need to worry about the mobile networks getting clogged during busy periods or the reception dropping out.The M30 was created with customisability in mind, so if you want your unit to work.......
-
Mobile Phone Alarm Dialer
The M30 Mobile Phone Alarm Dialer is a professional level unit, purposely designed and built for use in industrial and harsh environments.
Because the M30 is a professional Alarm Dialer it comes with all the types of feature you would expect including; 4,8,16,32 or 56 individual inputs, integrated battery backup, SMS and voice alarm messages, integrated mains failure and surge protection (For more features visit the Standard or Optional feature pages).
The M30 is used around world by a variety of businesses in a multitude of situations from Horticulture in Wales, Hotels & Hospitals i.......
-
M30 Alarm Monitoring System
The M30 Alarm Monitoring System is purposely designed to monitor your alarms and equipment 24 hours a day, 7 days a week 365 days a year.
When the M30 detects an alarm activation or a problem with your equipment it will instantly communicate this to the correct on call personal via voice, SMS or data over a std land line or the mobile/cell phone networks. The M30 will then continue to send messages until one of the personal acknowledges the problem and cancels any further messages, this prevents the common problem of someone not hearing their phone or falling over in bed and falling back to sleep.
-
New V50 software released for the M30 Alarm Dialer
The new V50 software version has many new features and improvements, but the main changes are listed below. Keypad
The M30 will now automatically progress to the next slot after a phone number has been added or edited.
The only exception is if it is already at the last slot in that roster/group.
Delays
All Dial out delays on the M30 can now be skipped over/though by simply pressing the "ESC" key.
This includes the Input delay, Inter-dial out delay and the Extended pause delay.
Number Skip Dial out Feature
The M30 now gives you the ability to manually select the number to be dialed from the currently selected roster.
For example during your .......
-
Computer Room Environmental Monitoring
Our M30 Alarm Autodialer is purposely designed for Monitoring the Environment in your Computer Room or other critical areas where environmentally sensitive and high value items / Processes / Lives need monitoring.
It does this simply connecting to your existing equipment and or our own monitoring devices and then when any problems occur communicating it by speech, SMS or data over PSTN land lines or via the mobile phone network.Not only can the M30 Monitor the Temperature and Moisture levels in your Computer Room but it can also connect to your
UPS systems, BMS, Network Monitoring solutions, Security, CCTV and Access control Systems or any device that provi
des an alarm output.
Install.......
-
Auto Telephone Dialer Alarm System Wireless
The M30 is an Auto Telephone Dialer alarm system that works wirelessly over the GSM mobile phone networks or can work over a standard PSTN land line phone system. The M30 has been purposely designed to work in harsh and hostile industrial conditions. and comes with all the types of feature you would expect from an industrial machine - including 4,8,16 & 56 separate inputs, over 24 hours of battery backup, an IP56 enclosure, Integrated mains failure detection plus many more.Check out the features section below or visit the Standard Features and Optional Features pages for more information.
Wireless Communication
The M30 can send both wireless speech and SMS messages over the GS.......
-
SMS Alarm Dialer
The M30 SMS Alarm Dialer is an rugged machine specifically designed for commercial and industrial conditions. It has over 60 years of alarm dialer design experience behind it and was designed with input from our customers to make sure it had all the features and functions they required.The M30 SMS features include 4,8,16 or 56 individual inputs each with their own SMS or voice message, IP56 enclosure, integrated mains failure and 24+hrs battery backup to name a few (check out a more in-depth list below).
SMS features;
The SMS feature is very easy to setup, when you are setting up the outgoing alarm contact numbers you just select whether you would like the recipient to get an SMS .......
-
CTR Channel to Roster Software Upgrade
On a Standard M30 on when dialing it will select the Duty Roster set by the User (1,2 or 3). The current Duty Roster selected is shown on the top right of the LCD display (e.g. R1, R2, R3).
The Channel to Roster software works differently. When an alarm becomes active, instead of the M30 dialling out on one of the Duty Rosters, the M30 will automatically select a Roster linked to that alarm channel.
So for Example;
If Channel 1 is activated it will dial Roster 1.
If Channel 5 is activated it will dial Roster 5.
If Channel 10 is activated it will dial Roster 10 etc.
This software upgrade is great for when you need to communicate different alarms to different people for example t.......
- c
- compose new post
- j
- next post/next comment
- k
- previous post/previous comment
- r
- reply
- e
- edit
- o
- show/hide comments
- t
- go to top
- l
- go to login
- h
- show/hide help
- shift + esc
- cancel
|