Updates from July, 2012 Toggle Comment Threads | Keyboard Shortcuts

• 

  M60 Alarm Dialer 12:42 pm on July 2, 2012 Permalink | Log in to leave a Comment
  Tags: Alarm Cancellation, GSM phone Network ( 26 ), Software ( 4 )   

  0 Key Alarm Cancellation Autodialler Software Upgrade 

  The M30 Autodialler ‘0’ key cancellation software upgrade provides the following additional feature to the standard M30.

  On a standard M30 when you want to acknowledge / cancel an active alarm. i.e. stop the M30 from calling anyone else on the current roster/dial out list, you phone the M30 back on the PSTN / Land Line or GSM phone number it is connected to, the M30 answers and acknowledges that the alarm has been cancelled.

  With the ‘0’ key upgrade you can cancel the alarm while you are listening to the alarm call. E.g. The M30 phones you to report there is a mains failure on site, during the call you press the ‘0’ key on your phones keypad, the M30 will hang up on you and cancel any further alarm calls.

  As per a standard machine if another alarm becomes active or the current alarm goes and comes back again the M30 will start calling out again.

  The software is currently available for nearly all 4, 8, 16 & 56 channel/input machines.

  As per all our software and hardware upgrades they can be customized to your exact needs.

  For more information please check out our Autodialler Optional Features page or Contact Us

   

  Reply Cancel reply

  You must be logged in to post a comment.

• 

  M60 Alarm Dialer 3:03 pm on June 26, 2012 Permalink | Log in to leave a Comment
  Tags: GSM phone Network ( 26 ), Software ( 4 ), Upgrade ( 4 )   

  Recycle After Cancellation Autodialler Software Upgrade 

  The M30 Autodialler Recycle after Cancellation software upgrade provides the following additional feature to the standard M30.

  On a standard M30 when you cancel / acknowledge an alarm call the only way that the M30 will dial out again is if another becomes active or the current alarm goes and comes back again.

  But in critical applications some business owners managers might want to put in an extra layer of defense against accidental or malicious cancellation –  i.e. You receive the call during the night, cancel it,  then role over and go back to sleep.

  With this upgrade installed, if the alarm is still active X minutes after the M30 has been cancelled, the M30 will start dialing out again. Only when then the alarm has been cleared will you be able to do a full cancel.

  The software is currently available for nearly all 4, 8, 16 & 56 channel/input machines.

  As per all our software and hardware upgrades they can be customized to your exact needs.

  For more information please check out our Autodialler Optional Features page or Contact Us

   
• 

  M60 Alarm Dialer 12:11 pm on June 19, 2012 Permalink | Log in to leave a Comment  

  Channel to Roster Autodialler Software Upgrade 

  The M30 Autodialler Channel to Roster software provides the following additional feature to the standard M30.

  The upgrade allows each individual input/channel to call a separate dedicated list of telephone numbers when an alarm is activated, this in effect combines up to 16 separate Autodiallers into one single unit.

  This feature can be very helpfully when you have different people or departments that have responsibility for different alarms e.g. channel 1 might need to call security and channel 2 might need to call the maintenance department.

  A lot of people use this feature to fit the M30 to Fire Alarm panels in shared premises, so when a fire zone is activated the M30 only phones the company/people associated with that zone.

  As per a standard M30, each roster (dial out list) can hold up to 5 separate numbers – This is upgradeable.

  The software is currently available for nearly all 4, 8 & 16 channel/input machines.

  As per all our software and hardware upgrades they can be customized to your exact needs.

  For more information please check out our Autodialler Optional Features page or Contact Us