Alarm System for Monitoring Unmanned Sites

Alarm System for Monitoring Unmanned Sites

The M60 is an industrial alarm dialler system purposely designed for use in the harsh environments often found in remote and unmanned sites.Alarm System for Monitoring Unmanned Sites

We have been designing and manufacturing Industrial alarm diallers for unmanned sites since 1956 and have brought all of our experience into our latest version the M60.

Below are just some of the features that the M60 has;

4 to 56 Individual Alarm Inputs

The M60 Alarm Dialler comes in multiple versions providing 4, 8, 16, 32 or 56 individual alarm inputs. Each input can be set as either Normally Closed or Normally Open, depending on your needs.

Integrated Battery Backup

The M60 comes with an integrated Battery backup providing up to 48 hours of coverage in a prolonged power cut, this can be increased with optional higher capacity battery packs.

Voice Alarm Messages over the GSM Mobile/Cell Phone networks

The M60 can use the 4G/3G mobile/cell phone networks to send voice alarm messages to your pre setup alarm contact list. Each input has its own dedicated voice message which can be customised by the end user; this allows you to easily identify which alarm has triggered the alarm rather than getting a standard “input 12 alarm” message

SMS Alarm Messages over the 4G & 3G Mobile/Cell Phone networks

The M60 can send customised SMS alarm messages to your alarm contacts. Each input has its own user definable message.

Phone Line Backup Facility

The M60 allows you to connect a standard landline as a primary phone connection; if this fails the M60 will automatically switch to the Mobile/Cell phone network.

Remote Integration

The M60 allows you to phone in at any time using the mobile/cell phone network to check its current status. During the Remote Integration the M60 will report any active alarms and let you know if any previously active alarms have now cleared.

The M60 Alarm System for Monitoring Unmanned Sites standard features include;

  • 4, 8, 16, 32 & 56 individual alarm inputs / channels.
  • Individual Speech Messages for each input.
  • Individual SMS Messages for each input.
  • PSTN & GSM Options.
  • Internal Mains Failure Alarm Sensor.
  • 48 Hour Internal Battery Backup.
  • Fully Menu and Keypad Driven.
  • IP56 Industrial Rated Enclosure.

Because the M60 is built by us in the UK if there are any special features you require for your project we can normally create them for you.

The above is only a small subset of the available features on the M60 Alarm System for Monitoring Unmanned Sites; for a complete list visit the Standard Features and Optional Features pages or contact us for a quote.

Related Articles:

Written by

Alarm System for Monitoring Unmanned Sites was last modified: January 25th, 2021 by M60 Alarm Dialer