Remote Alarm Monitoring SMS
You can have the most advanced alarm system in the world, but like the proverbial tree in the forest, if no one hears it, not only was the system a waste of money but you have probably lost whatever it was monitoring.
That is why our M30 Alarm Dialer is specifically designed to Remotely Monitor Alarms on unmanned or critical industrial / commercial sites. It comes with all the types of feature you would expect from an industrial unit, including; 4-56 separate inputs, GSM & PSTN communication, industrial components, integrated battery backup and an IP56 enclosure. – Check out more features at the bottom of this post.
The M30 Alarm dialer can even be installed in locations without a physical phone line by using its GSM voice and SMS options.
The SMS option allows you can choose the type of message (SMS / Speech message) each alarm recipient will get via the easy to use LCD and menu system. E.g. If you wanted you could set it up so that the first person gets a SMS, the second a voice, the third a SMS etc.
Each input/channel on the M30 has its own user definable message SMS and speech message so instead of a generic “channel 1 alarm” you will receive a more useful “High Temperature in building 181” each machine also has a unit identifier message (e.g. “This is the Aberdeen water treatment plant”) to enable you to easily distinguish where the alarm message has come from.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation from any phone.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application then we will normally be happy to create it for you.
Written by M60 GSM Alarm Dialer