The M60 Telephone Line Sensing Module works as either a plug in module for the M60 Autodialer or as a standalone module.

It continuously monitors the connected land line for

• Faults
• Total failure.
• Drop in Voltage.
• Engaged tone.
• If someone intentionally or accidentally tries to block the M60 by blocking the line.

Once a Fault has been detected the Module can.

• Tell the M60 to swap to a secondary Communication medium e.g. the GSM Alarm Dialer module.
• Initiate a local alarm e.g. Siren and or Strobe.
• Send a Radio Page to on-duty Personal.
• Trigger a Backup GSM dialer

If the Line Sensing Module is used as a standalone module the following is required.

• A 12 Vdc Power supply
• Connection to a telephone line.
• A sounder or strobe light for audible / Visual warning of a failed telephone line.

Cookies and your Privacy

Return to the M60 Alarm Dialler Home Page

A Packs Infotel Designed Product, 1 Broomfield hall buildings, London road, Sunningdale, Ascot, Berkshire, SL5 0DP, United Kingdom.
 Tel +44 (0)1344 874114 Fax +44 (0)1344 874664

Guildford Website Design

01344 874114

[M60 Autodialer] [Standard Features] [Optional Features] [What is a Alarm Autodialer] [M60 Expander] [GSM Dialler Module]
[SMS Alarm Messages] [Analogues & Data Logging] [Line Sensing] [Central Station] [Lone Worker] [M60 Alarm Splitter]
[M60 Online Blog] [Autodialler Comparison]
[Autodialler Applications] [Poultry Alarm System] [Power Station Autodialer] [Building Management Autodialler]
 [Autodialler Gas & Oil] [Refrigeration & Storage Autodialer] [Land fill Autodialler] [Waste Water Autodialler]
[Flood Warning Autodialler] [Livestock Autodialler] [Horticulture Autodialler] [SCADA Autodialer] 
[M60 Data sheets] [M60 Photo Gallery] [Contact Us] [Sitemap] [Privacy and Cookies Policy]