The M30 Autodialer Central Station is designed for users who either have multiple M30’s or have a M30 in a critical situation.

The Central Station works as a central hub between all the users sites.

A Central Station works as follows.

The Central Station is connected to a standard telephone line and accepts information (Alarms and occurrences) from multiple M30’s as well as gathering information (Auto polling / interrogation) from them.

The Central Station provides a visible and tangible real time display and records all events from the linked M30’s. It performs all its routines e.g. Auto polling, with out effecting the standard dial out and response procedures at the remotes sites.

  • At designated intervals the central station Auto polls each M30 on its list.
    • It then does a test on the M30 and logs the current status
    • If their is a problem with the M30 it can sound a local audible \ visual alert and or set off a local M30.
  • When a M30 does a alarm call it phones the Central Station as part of its dial out roster.
    • It logs the alarm call.
    • If selected can call back the M30 to cancel any more calls.
    • sounds a local audible \ visual alert
    • It can set off a local M30.
  • All Calls in or out of the Central station are Logged digitally and can also be printed out in real time.
The M30 Central Station

  M30 Alarm Autodialer Central Station

Picture of central station software

Above is the Main Interface for the Software

Central Station report

Above is a Generated Report

Features of the CENTRAL STATION:

    AUTO POLLING - The Central Station can be programmed to automatically dial out and interrogate all the M30’s at pre-set times to regularly check the status at each remote site. This feature also has a number of other benefits including; checking the condition of the telephone lines, M30 Status and whether the M30 has been turned off. Auto polling can be initiated automatically, manually or when only one alarm has been reported.

    ALARM- reporting from outstations. Automatic recording and storage of history of alarms.

    DISPLAY- of alarm history - with details of time, date, location and alarm type.

    PRINTOUT- as alarms occur they can be printed out on a printer with details of time, date, location and alarm type.

    ALARM OUTPUT- If one or more outstations is in alarm or cannot be interrogated on auto polling then a signal can be activated to produce an audible alarm or as a trigger to make an alarm call via a local M30. - This allows the communication of a fault even if there is a catastrophic failure at the remote site.

 

Return to the M30 Alarm Dialler Home Page

A Packs Infotel Designed Product, 1 Broomfield hall buildings, London road, Sunningdale, Ascot, Berkshire, SL5 0DP, United Kingdom.
 Tel +44 (0)1344 874114 Fax +44 (0)1344 874664

Contact us about the M30 Alarm Auto dialler

Guildford Website Design

Why not follow us on Twitter?
Why not check check us out on facebook?
Why not add us to your circles?
Auto Dialler Features

[M30 Autodialer] [Standard Features] [Optional Features] [What is a Alarm Autodialer] [M30 Expander] [GSM Dialler Module]
[SMS Alarm Messages] [Analogues & Data Logging] [Line Sensing] [Central Station] [Lone Worker] [M30 Alarm Splitter]
[M30 Online Blog] [Autodialler Comparison]
[

Autodialler Applications] [Poultry Alarm System] [Power Station Autodialer] [Building Management Autodialler]
 [Autodialler Gas & Oil] [Refrigeration & Storage Autodialer] [Land fill Autodialler] [Waste Water Autodialler]
[ Flood Warning Autodialler] [Livestock Autodialler] [Horticulture Autodialler] [SCADA Autodialer
[M30 Data sheets] [M30 Photo Gallery] [Contact Us] [Sitemap] [Cookies]

Packs Infotel Ltd
Find us on Google Plus
Find us on Instergram
Find us on Facebook
Find us on Pinterest
Find us on Twitter