Tagged: M30 RSS Toggle Comment Threads | Keyboard Shortcuts
Heavy Duty GSM Auto Dialer The M30 is a Heavy Duty Alarm Autodialer that can work over both the GSM and PSTN phone networks. It is specifically designed for use in hash industrial and commercial environments and comes with all the features that you would expect from a Heavy Duty Auto Dialer. Including 4,8,16 and 56 separate inputs, IP65 enclosure, integrated 24 hr battery backup, spike and surge protection on all inputs, Military quality components and various backup options. Voice over GSM The GSM Converter Module allows the M30 to use a GSM mobile connection to send and receive voice calls; this is in addition to a PSTN connection. The Module comes with a separa.......
Alarm Isolate PanelAlarm Isolate Panel The Splitter 2 Alarm Isolate Panel can monitor alarm inputs from up to 16 totally separate devices. For example High / Low Temperature, Mains Failure, Security Alarm Panel, Building Management Systems, Boiler Lockout, Standby Generators, Water levels, Humidity etc. The Splitter 2 Alarm Isolate Panel offers both a visual and audible indication of each separate alarm condition and offers you the ability toindividually isolate each input / output at the push of a button Features
- 16 Separate Inputs
- 16 Separate Outputs
- Bell / Strobe Output
- Bell / Strobe Isolate
- Individual Alarm Isolates
- Mains Failure.......
Updated M30 Alarm Autodialler ManualsTo welcome in 2013 we have reissued the M30 Installation and Operating Manuals with all the latest features and enhancements that have been made over the last couple of years - Including the SMS Autodialler Upgrade.To download or view the new 2013 Manuals go to our Data sheet / Manuals Page or click the links below 2013 M30 Autodialler Installation Manual 2013 M30 Operating Manual
For More Information or help on our M30 Autodialler please Contact us or check out the M30 Autodialler FAQ Page.
How to change the Model 30 Alarm Dialler SoftwareHow to change the Model 30 Alarm Dialler Software The software that controls the M30 can be found on the CPU board, located on the back of the M30 membrane/front panel. IMPORTANT: Before changing the M30 software ALL power MUST be disconnected from the M30. To do this first remove the Mains power, this could be done at the source, or by simply pulling out the fuse holder located on the Mains block inside the M30. It should be noted that the M30 still has power (I.e. The display is still showing information). This is due to the battery back-up inside the M30. To disconnect the battery back-up simply press the OFF button located on the Power Supply.......
Wireless Alarm AutodiallerWireless Alarm Autodialler Sometimes it can be more convenient to have a Wireless Alarm Autodialler instead of a wired one connected to the PSTN networks. Our Wireless Autodialler uses the GSM mobile networks in order to send and receive alarm messages. Wireless systems do have a number of advantages over a standard wired system;
- Where it is not possible to get a PSTN landline installed.
- Where the cost is prohibitive to get a landline installed.
- Can be used in a temporary installation.
- Can be used where the item being monitored is regularly moved.
- Where there is high risk that a land line might fail either because .......
What is a GSM Alarm Dialler?GSM Alarm Diallers are fairly new to the market (i.e. the last 8 years or so) but in that time have shown themselves to be very useful and convenient either as an alternative to a standard Alarm Dialler or as a backup device. In situations where it is not practically or financially viable to get a land line installed or where there is a high chance someone might try to block the line a GSM Dialler can be ideal. A GSM Alarm Dialler is essentially the same as Landline Version but accepts a sim card and uses the GSM networks to make and receive alarm calls rather than PSTN land lines. Not all GSM Diallers are equal most are very cheap and are not designed to cope with commercial or industr.......
Auto Dialer Alarm ManufacturerAuto Dialer Alarm Manufacturer We (Packs Infotel Ltd) have been manufacturing Alarm Auto Dialers since 1958. All our Auto Dialers are wholly made and designed in the UK using industrial specification components. Because we manufacture the equipment ourselves we can customize your unit to your exact needs including writing special software or creating new hardware.
For more information on our current model please visit our Main M30 Auto Dialer Page