Updates from August, 2012
M60 Alarm Dialer 11:32 am on August 13, 2012 What is a GSM Alarm Dialler?
Tags: Alarm Dialler ( 9 ), autodialer ( 9 ), Autodialler ( 15 ), GSM Alarm Dialer ( 3 ), GSM Alarm Dialler ( 3 ), GSM phone Network ( 14 ), Industrial ( 5 ), M30 ( 45 ), Remote Alarm Monitoring ( 13 )GSM Alarm Diallers are fairly new to the market (i.e. the last 8 years or so) but in that time have shown themselves to be very useful and convenient either as an alternative to a standard Alarm Dialler or as a backup device. In situations where it is not practically or financially viable to get a land line installed or where there is a high chance someone might try to block the line a GSM Dialler can be ideal. A GSM Alarm Dialler is essentially the same as Landline Version but accepts a sim card and uses the GSM networks to make and receive alarm calls rather than PSTN land lines. Not all GSM Diallers are equal most are very cheap and are not designed to cope with commercial or industr.......
M60 Alarm Dialer 12:35 pm on July 30, 2012 SMS Alarm Messages
Tags: Alarm Dialler ( 9 ), GSM phone Network ( 14 ), Message, SMS Alarm Message ( 16 )
SMS Alarm MessagesThe M30 Auto Dialler can now send SMS Alarm Messages instead of or as well as Real Speech Messages. The upgrade is available to be supplied with a new Auto Dialler or as a retro upgrade to a currently installed machine. This is ideal for people who want a visible alarm message instead of an audible message or for logging alarms. But you need to bare in mind that SMS messages are not a guaranteed service i.e. the message might arrive instantly, in 5 minutes or 5 hours. Also if your phone is out of reception when the SMS message is sent very often there is an extended delay for delivery.
For more information visit the
M60 Alarm Dialer 3:34 pm on July 24, 2012 GSM Frequency Bands for Alarm Dialers
Tags: Alarm Dialer ( 39 ), bands, Frequencys, GSM phone Network ( 14 )
GSM Frequency Bands for Alarm DialersGSM Frequency Bands for Alarm Dialers Europe & the USA operate on different Frequencies or Bands. GSM 900 / GSM 1800 MHz are used in most parts of the world: Europe, Asia, Australia, Middle East, Africa. GSM 850 / GSM 1900 MHz are used in the United States, Canada, Mexico and most countries of S. America. A USA "Dual Band" Alarm Dialer or phone will not work in Europe, Asia, or Australia. A Europe "Dual Band" Alarm Dialer or phone will nor work in the USA, Canada or Mexico. A "Tri-Band" Alarm Dialler has three GSM bands 900/1800/1900 MHz or 850/1800/1900 MHz A "Quad Band" Alarm Dialler supports the four main GSM frequencie.......
M60 Alarm Dialer 12:42 pm on July 2, 2012 0 Key Alarm Cancellation Autodialler Software Upgrade
Tags: Alarm Cancellation, GSM phone Network ( 14 ), Software ( 4 )
0 Key Alarm Cancellation Autodialler Software Upgrade
The M30 Autodialler '0' key cancellation software upgrade provides the following additional feature to the standard M30.
On a standard M30 when you want to acknowledge / cancel an active alarm. i.e. stop the M30 from calling anyone else on the current roster/dial out list, you phone the M30 back on the PSTN / Land Line or GSM phone number it is connected to, the M30 answers and acknowledges that the alarm has been cancelled.
With the '0' key upgrade you can cancel the alarm while you are listening to the alarm call. E.g. The M30 phones you to report there is a mains failure on site, during the cal.......
M60 Alarm Dialer 3:03 pm on June 26, 2012 Recycle After Cancellation Autodialler Software Upgrade
Tags: GSM phone Network ( 14 ), Software ( 4 ), Upgrade ( 4 )
Recycle After Cancellation Autodialler Software Upgrade
The M30 Autodialler Recycle after Cancellation software upgrade provides the following additional feature to the standard M30.
On a standard M30 when you cancel / acknowledge an alarm call the only way that the M30 will dial out again is if another becomes active or the current alarm goes and comes back again.
But in critical applications some business owners managers might want to put in an extra layer of defense against accidental or malicious cancellation - i.e. You receive the call during the night, cancel it, then role over and go back to sleep.
With this .......
M60 Alarm Dialer 12:11 pm on June 19, 2012 Channel to Roster Autodialler Software Upgrade
Channel to Roster Autodialler Software Upgrade
The M30 Autodialler Channel to Roster software provides the following additional feature to the standard M30.
The upgrade allows each individual input/channel to call a separate dedicated list of telephone numbers when an alarm is activated, this in effect combines up to 16 separate Autodiallers into one single unit.
This feature can be very helpfully when you have different people or departments that have responsibility for different alarms e.g. channel 1 might need to call security and channel 2 might need to call the maintenance department.
A lot of people use t.......