0 Key Alarm Cancellation Autodialler Software Upgrade

The M30 Autodialler ‘0’ key cancellation software upgrade provides the following additional feature to the standard M30.

On a standard M30 when you want to acknowledge / cancel an active alarm. i.e. stop the M30 from calling anyone else on the current roster/dial out list, you phone the M30 back on the PSTN / Land Line or GSM phone number it is connected to, the M30 answers and acknowledges that the alarm has been cancelled.

With the ‘0’ key upgrade you can cancel the alarm while you are listening to the alarm call. E.g. The M30 phones you to report there is a mains failure on site, during the call you press the ‘0’ key on your phones keypad, the M30 will hang up on you and cancel any further alarm calls.

As per a standard machine if another alarm becomes active or the current alarm goes and comes back again the M30 will start calling out again.

The software is currently available for nearly all 4, 8, 16 & 56 channel/input machines.

As per all our software and hardware upgrades they can be customized to your exact needs.

For more information please check out our Autodialler Optional Features page or Contact Us

Related Articles:

Written by



0 Key Alarm Cancellation Autodialler Software Upgrade was last modified: February 11th, 2013 by M30 Alarm Dialer